CE1CCS-Construction Science

Module Provider: School of Construction Management and Engineering, School of Built Environment
Number of credits: 20 [10 ECTS credits]
Level:4
Terms in which taught: Autumn / Spring term module
Pre-requisites:
Non-modular pre-requisites:
Co-requisites: CE1CCT Construction Technology
Modules excluded:
Module version for: 2017/8

Module Convenor: Dr Mehdi Shahrestani

Email: m.shahrestani@reading.ac.uk

Summary module description:
This module introduces the fundamental concepts of Construction Science through an examination of the physical properties and mechanics of construction materials and the physics of heat, fluids, light sound and electricity.The application of these concepts is described in the CE1CCT Construction Technology Module delivered in the Autumn Term and the concepts are reinforced through the experimental elements of the CE1CES Empirical Science Module which is delivered in the Spring Term.This integrated approach enables the theories and concepts learnt in CE1CCS to be used in other modules, thus helping to reinforce knowledge and understanding and develop critical analysis.

Aims:
Overall:

•To provide an understanding of the scientific and engineering principles of construction materials, the internal environment and environmental services.
•To enable the scale of forces, heat loads, Illuminance and sound to be calculated.
•To develop knowledge of water based and electrical engineering systems.

Assessable learning outcomes:
By the end of the module it is expected that the student should be able to:

•Understand the characteristics and performance of different construction materials.
•Appreciate how components are configured and incorporated into buildings.
•Appreciate the environmental implications of materials use.
•Calculate tensile and compression forces in simple structures and trusses.
•Calculate buckling loads and apply bending moments diagrams for loaded beams.
•Appreciate the basic principles of building heat losses.
•Understand the factors associated with human response to heat, air movement and comfort conditions.
•Understand the technology used in the services of simple low-rise buildings.
•Be able to explain basic systems used in low-rise buildings for cold and hot water supply.
•Understand the nature and provision of surface water and foul drainage.
•Comprehend the basic physical laws of light, sound and electricity.
•Understand the way electricity is supplied and distributed for power and light.

Additional outcomes:

Outline content:
•Structure, composition, properties and performance of building materials (concrete, masonry, metals, timber, plastics, glass, bituminous and paints).
•Testing and regulations of building materials.
•Basic concepts of stresses and strains of simple structures.
•Calculation of shear forces, bending moments and deflection of fabrics.
•Moisture, its sources, movement and control in buildings.
•Basic principles of human comfort requirements.
•Principles of fluid flow in pipes and ducts and pressure losses.
•Physical principles of sound, its transmission in rooms and noise levels.
•Physics of light, its measurement and methods of calculating lighting levels in buildings.
•Principles and basic calculations of drainage and discharge systems for foul and surface water.
•Water supply and cold water distribution systems.
•Basics principles of electricity, its generation, distribution and types of power supply.

Brief description of teaching and learning methods:
Lectures, Tutorials and Private Study

Contact hours:
  Autumn Spring Summer
Lectures 20 26 1
Tutorials 18 26
Guided independent study 47 62
       
Total hours by term 85.00 114.00 1.00
       
Total hours for module 200.00

Summative Assessment Methods:
Method Percentage
Written exam 80
Class test administered by School 20

Other information on summative assessment:

Formative assessment methods:
A series of tutorials provide students with the opportunity to improve their performance through the feedback provided.

Penalties for late submission:
The Module Convenor will apply the following penalties for work submitted late, in accordance with the University policy.

  • where the piece of work is submitted up to one calendar week after the original deadline (or any formally agreed extension to the deadline): 10% of the total marks available for the piece of work will be deducted from the mark for each working day (or part thereof) following the deadline up to a total of five working days;
  • where the piece of work is submitted more than five working days after the original deadline (or any formally agreed extension to the deadline): a mark of zero will be recorded.

  • The University policy statement on penalties for late submission can be found at: http://www.reading.ac.uk/web/FILES/qualitysupport/penaltiesforlatesubmission.pdf
    You are strongly advised to ensure that coursework is submitted by the relevant deadline. You should note that it is advisable to submit work in an unfinished state rather than to fail to submit any work.

    Length of examination:
    One 2 hour examination

    Requirements for a pass:
    A mark of 40%

    Reassessment arrangements:
    A set exercise (20%) to be completed by 22nd August and a 2 hour re-examination in August /September

    Additional Costs (specified where applicable):
    1) Required text books:
    2) Specialist equipment or materials:
    3) Specialist clothing, footwear or headgear:
    4) Printing and binding:
    5) Computers and devices with a particular specification:
    6) Travel, accommodation and subsistence:

    Last updated: 6 November 2017

    Things to do now