English English
Change language
  • NederlandsNederlands
  • FrançaisFrançais
  • DeutschDeutsch
  • العربيةالعربية
  • ItalianoItaliano
  • SvenskaSvenska
  • NorskNorsk
  • DanskDansk
  • РусскийРусский
  • CastellanoCastellano
  • Introduction
  • Search
  • Results
  • Details
  • Selection
  • Search History
Actions
  • Print
Displays
  • Extended display
  • Object card
Loading
  • Object number
    66/141
  • Description
    A tapering pit saw found on a junk pile at Waxway Farm in Ottery Saint Mary, Devon. Used by the farm's owner and his father before him.
    A tapering pit saw with a small upper wooden handle; it is missing its lower handle. It was found on a junk pile at Waxway Farm in Ottery Saint Mary, Devon, and was used by the farm's owner and his father before him.
  • Physical description
    1 saw: metal, wood
  • Archival history
    Letter, donor to MERL, 13 June 1966 – ‘Dear Mr Jewell // Thank you for your letter of a few days ago from which I note that you would like the pit-saw. I made a mistake originally in calling it a one-man saw. It is in fact a normal two-man model and on going through the junk-heap again with the owner (Mr E. W. Mutter, Waxway Farm, Ottery St. Mary) we found the top handle which I am sending with the saw. Apparently the bottom handle was made entirely of wood and I have attempted to show it from Mr Mutter’s description, in a diagram. He had used the saw himself as a boy and his late father, who was a carpenter by trade who took up farming, used it frequently for sawing out purlins, joints, beams and boards. The rate of output was apparently about 200ft. run per day for two men or a man and a boy, cutting from say 12”–18” diameter tree. The routine was for the tree to be drawn by horse to the pit. It was actually a sort of pier or trestle built out over a deep, steep sided depression in the corner of a field near the buildings. There, the tree was roughly barked with an axe and one side roughly flattened. It was then laid out over the pit and a ball of wool or twine dipped in red paint. This was strung out along the tree tautly, held each end and lifted and “pinged” like a bow-string at intervals to mark the proposed line of cut for the sawyer to follow. // Mr Mutter told me that the last gate on the farm made from wood cut with this saw finally broke down about five years ago [circa 1961]. He remembers this particularly as it had been badly cut on the curve by a workman, then employed by his father. His bad workmanship had to suffer the constant attention and comment of a variety of people for nearly fifty years!! // It is very interesting to get Mr Mutter talking, as it was his father, when he was alive. The present Mr Mutter’s grandfather came from Beer where his father was a smuggler. As a boy the grandfather took part in several smuggling operations mainly involving French Brandy. // Whilst looking through the scrap heap we came across a barley-awner or ‘ailer. It looks like a boot scraper with a stirrup over it and a spike at the top for mounting on a handle. // After threshing barely on the barn floor with a flail, the awner was bumped up and down on the corn to break off the awns or “whichers”. I might be able to send this on if you are interested although it is a rather awkward shape. // Trusting that this is all of interest. // Yours sincerely, …’
  • Object name
    Saw, pit
  • Material
    Metal, Wood
  • Associated subject
    PROCESSING : wood processing
Loading
Page
1
University of Reading | Archive and Museum Database
Axiell ALM